Features:
170 Degree CCD 4LED Night vision Car license plate license plate
This Waterproof Europe license plate frame with rearview camera is a new and never used high quality product. With High-definition wide viewing angles and good waterproof functions, it’s perfectly to fit with your license plate, and also help reduce incidents and accident. It’s the best way for you to kill two birds with one stone!
Specifications:
Image Device:1/3 inch color CCD TV system: PAL/NTSC(Default) Effective pixels: 628 x 582 Pixels Sensing area:5.78 x 4.19mm Sync. system internal Resolution: 420TV lines Electronic Shutter:1/50-1/10000 seconds Minimum illumination: 0.3Lux/F1.2 Lens angle:170° S/N ratio:more than 48db(AGC-OFF) Color:Black Video output:RCA CONNECTOR, 1.0VP-P, 75ohm Current Consumption:≤150mA Power supply:DC 12V Operating Temperature:-30°C to +50°C, RH95% Storage temperature:-40°C to +60°C, RH95% Max. GPS Wireless Module
1.100% brand new,High quality
2.Easy installation
3.Take one minute get your camera become a wireless camera
4.Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
5.Work Range:Up to about 50m(Hollowness)
6.Connects to rear-view camera and front video screen
7.Fit all RCA composite video connections
8.Power: DC 9-12V
9.Transmitter Cable Length:1.2m
How to Install a Camera with the Wireless Module
Take out your stock license plate light at the back of your car. Fix the camera to where the stock license plate light was. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power Connect the wireless module (transmitter) to your camera via the two cables - one plug for AV output and one plug for power Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative Connect the wireless module (receiver) to your car GPS - USB for GPS USB port, other one for AV input. Connect the wireless module (receiver) to your car cigarette lighter to get the power - better connect one car charger You will see the images on GPS when your car is in reverse shift.
Please note that this module is for GPS, not for in-car monitor or DVD.
Package include:
1 x license plate Rear View Camera
1 x 2.4G Wireless AV Transmitter
1 x 2.4G Wireless AV Receiver
This Waterproof Europe license plate frame with rearview camera is a new and never used high quality product. With High-definition wide viewing angles and good waterproof functions, it’s perfectly to fit with your license plate, and also help reduce incidents and accident. It’s the best way for you to kill two birds with one stone!
Specifications:
Image Device:1/3 inch color CCD TV system: PAL/NTSC(Default) Effective pixels: 628 x 582 Pixels Sensing area:5.78 x 4.19mm Sync. system internal Resolution: 420TV lines Electronic Shutter:1/50-1/10000 seconds Minimum illumination: 0.3Lux/F1.2 Lens angle:170° S/N ratio:more than 48db(AGC-OFF) Color:Black Video output:RCA CONNECTOR, 1.0VP-P, 75ohm Current Consumption:≤150mA Power supply:DC 12V Operating Temperature:-30°C to +50°C, RH95% Storage temperature:-40°C to +60°C, RH95% Max. GPS Wireless Module
1.100% brand new,High quality
2.Easy installation
3.Take one minute get your camera become a wireless camera
4.Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation)
5.Work Range:Up to about 50m(Hollowness)
6.Connects to rear-view camera and front video screen
7.Fit all RCA composite video connections
8.Power: DC 9-12V
9.Transmitter Cable Length:1.2m
How to Install a Camera with the Wireless Module
Take out your stock license plate light at the back of your car. Fix the camera to where the stock license plate light was. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power Connect the wireless module (transmitter) to your camera via the two cables - one plug for AV output and one plug for power Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative Connect the wireless module (receiver) to your car GPS - USB for GPS USB port, other one for AV input. Connect the wireless module (receiver) to your car cigarette lighter to get the power - better connect one car charger You will see the images on GPS when your car is in reverse shift.
Please note that this module is for GPS, not for in-car monitor or DVD.
Package include:
1 x license plate Rear View Camera
1 x 2.4G Wireless AV Transmitter
1 x 2.4G Wireless AV Receiver
Specification:
Brand Name: Koorinwoo
Lens Material: Plastic + Glass
Wire or Wireless: Wireless
Guiding Line: Yes
Shell Material: PLASTIC
Alarm Type: Vehicle Backup Cameras,Accessories
Material Type: Abs