Upgraded cover and chip for board, provides better 1S LiPo charging experience
Perfect for Blade Inductrix and Tiny Whoop battery charging, also come with JST and Micro Losi adapter cables
Charge 1S LiPo batteries (4.2V) or HV Lipo batteries (4.35V) at the same board by a selectable switch.Input Voltage: 7-20V, XT60 2S-4S LiPo or DC 12V/3A adapter for field charging and home charging
200/600mA selectable current per charge port, charge up to 6 pcs batteries with Picoblade 1.25 or JST PH2.0 power plug at once
When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn solid until the battery is fully charged. Once charged, the LED will turn flashing and you can remove your 1s battery and fly
New version with Upgraded Cover
Specification:
Weight: 50g
Dimensions: 80 x 50 x10 mm
Input Voltage: 7-20V
Input port: Two methods, DC 12V/3A Adapter, XT60 LiPo Battery or Adapter
Output port: USB 5V/2.4A
Charge port output: Selectable 200mA and 600mA, Max charge power: 2.5W
4.20V cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35V cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Optional AC Wall Adapter with XT60 Plug
Digital Display:
INP/xxV: Input voltage
CH1.....CH6/xxV: Inserted battery voltage
USB/xxV: USB output voltage
LED Indicators:
Green Flashing slowly: 4.20V selected
Green Flashing rapidly: 4.35V selected
Green Solid: Battery Charging
Green turn Flashing from Solid: Full Charged
Package Including
1 * 1S LiPo LiHV Charger Board
3 * JST-PH 2.0 Male to JST Female Cable
3 * JST-PH 2.0 Male to Micro Losi Female Cable